Applications:

The steel bar bending testing machine is a special equipment for cold bending test and plane reverse bending test of steel bar (or steel plate). Its main technical parameters are in line with GB/T232 "Bending Test Methods for Metal Materials", GB/T1499.2 "Steel for Reinforced Concrete - Part 2: Hot-rolled Ribbed Steel Reinforcement" and YB/T5126 "Steel for Reinforced Concrete - Bending and Reverse Bending Test Methods" and ISO10065 "Bending and Repeated Bending Test of Steel Reinforcement for Concrete Reinforcement" related to 180°Regulations and requirements for flexure tests (cold bend tests) and plane reverse bend tests. This equipment is an ideal test equipment for steel mills and construction units to test the bending and reverse bending properties of steel bars.

The steel bar bending testing machine has the characteristics of compact structure, simple operation, intuitive bending angle display, easy maintenance, stable operation and safety.

Technical parameter:

Maximum diameter of bending steel bar: Dia.6-40mm

Positive bending angle: Any setting within 0-180°

Reverse bending angle: Any setting within 0-180°

Bending angle can be measured when the load is maintained.

Real-time measurement by dual sensors

Max. bending span is 365mm

The rated pressure of the cylinder is 300KN

Piston stroke 300mm

Piston rising speed: 0-80mm/min (adjustable)

Piston lowering speed: 0-160mm/min (adjustable)

Minimum resolution of angle measurement is 0.1°

Angle measurement accuracy: ±1%

Working pressure of the hydraulic station: 0-25MPa

Motor power: 2.2kW

Machine dimension: 950*730*2100mm

Weight of the machine: Approx. 850KG

Bending diameter: 24-200mm