Applications:

It is used for test engineering plastics, glass-steel, ceramics, casting stone, plastic wiring, insulating material, plastic pipe material and other non –metallic materials for anti- impact intensity.

The products satisfy the standard demands of ISO 179, ISO 180,GB/T 1043, GB/T 1843,ASTM D256,DIN53453,GB18743,ISO9854,DIN12608 and others. Each type has both electronic type and pointer type. The electronic type adopts raster -display technique of measuring circle angle, with the characteristics of high precision, good stability and wide range of measuring, digital display of testing split strength, impact intensity, fore-elevation, ascending angle, automatic correcting average value of one group for energy losing.

Main technical parameter:

Distance between clamps of  Charpy:  40mm  60mm  70mm  95mm

(Charpy) Impact energy: 1J  2J  4J  5J   impact speed: 2.9m/s

(Charpy) Impact energy: 7.5J  15J  25J   impact speed: 3.8m/s

Main configuration:

1. Main frame                                             one

2. Fastness support seat(on charpy impact grip)               one

3. Movement support seat(on charpy impact grip)              one

4. Former for regulate center(40,60,70,95)                    one set

5. Adjustment gasket(2,2.5,3.5,5,7 )                          two each

6. R1 R2 supporting knife-edge                              two each

7. Charpy impact hammer(1J 4J 7.5J 15J 25J )                one each

8. Charpy impact weight(2J 5J)                              one each

9. Power line                                              one

10. Within six angle spanner(4,5,6,8)                         one  each

11. Screwdriver                                            one