Application:

It is used for test engineering plastics, glass-steel, ceramics, casting stone, plastic wiring, insulating material, plastic pipe material and other non –metallic materials for anti- impact intensity.

The products satisfy the standard demands of ISO 179, ISO 180,GB/T 1043, GB/T 1843,ASTM D256,DIN53453,GB18743,ISO9854,DIN12608 and others. Each type has both electronic type and pointer type. The electronic type adopts raster -display technique of measuring circle angle, with the characteristics of high precision, good stability and wide range of measuring, digital display of testing split strength, impact intensity, fore-elevation, ascending angle, automatic correcting average value of one group for energy losing.

Main technical parameter:

Distance between clamps of Izod :  40mm  60mm  70mm  95mm

(Izod) Impact energy: 1J  2.75J  5.5J  11J  22J   impact speed: 3.5m/s  

 Main configuration

1. Main frame                                               one

2. Izod grip                                                 one

3. Former for regulate center ( 40,60,70,95 )                    one set

4. Adjustment gasket ( 2,2.5,3.5,5,7 )                           two each

5. R1 R2 supporting knife-edge                                two each

6. Cantalever girder benchmark                                one

7. Izod impact hammer (1J  5.5J  11J  22J )                   one each

8. Impact weight（2.75J ）                                    one each

9. Power line                                                 one

10. Internal six angle spanner ( 4  5  6  8)                      one each

11. Screwdriver                                               one