Application:

It is used for test engineering plastics, glass-steel, ceramics, casting stone, plastic wiring, insulating material, plastic pipe material and other non –metallic materials for anti- impact intensity.

The products satisfy the standard demands of ISO 179, ISO 180,GB/T 1043, GB/T 1843,ASTM D256,DIN53453,GB18743,ISO9854,DIN12608 and others. Each type has both electronic type and pointer type. The electronic type adopts raster -display technique of measuring circle angle, with the characteristics of high precision, good stability and wide range of measuring, digital display of testing split strength, impact intensity, fore-elevation, ascending angle, automatic correcting average value of one group for energy losing.

Main technical parameter:

Distance between clamps of Charpy:  40mm  60mm  70mm  95mm

(Izod) Impact energy:  1J  2.75J  5.5J  11J  22J   impact speed: 3.5m/s  

(Charpy)Impact energy:  1J  2J  4J  5J  7.5J  15J  25J    

 impact speed: 2.9m/s and 3.8m/s

Main configuration

1. Main frame                                               one

2. Cantalever girder grip                                      one

3. Fastness support seat（on charpy impact grip）              one

4. Movement support seat（on charpy impact grip）             one

5. Former for regulate center（ 40,60,70,95）                   one set

6. Adjustment gasket（2 ,2.5,3.5, 5,7 ）                        two each

7. R1 R2 supporting knife-edge                                two each

8. Cantilever girder benchmark                                one

9. Charpy impact hammer（1J 4J 7.5J 15J 25J ）               one each

10. Cantalever girder hammer（1J 5.5J 11J 22J ）              one each

11. Charpy impact weight（2J 5J）                            one each

12. Cantalever girder weight (2.75J)                            one

13. Power line                                               one

14. Internal six angle spanner（4、5、6、8）                   one each

15. Screwdriver                                              one