Introduction to Basic Parameters:

This testing machine is used for the friction and wear performance test of materials, material surface coatings and component surfaces. It provides a wide load range and rotation speed. Tests with different friction pairs such as ball-on-disc and pin-on-disc can be performed. A computer automatically detects all parameters to be measured under different friction modes; the friction coefficient, friction force, load and torque can all be measured during the test and displayed synchronously in the form of data and graphs. With an environmental control system installed, the test temperature and ambient atmosphere can be adjusted.

This instrument can be widely used in the research of material surface processing technology, the evaluation of material failure and reliability, and the quality inspection and control of industrial products. The device is equipped with automatic shutdown protection, and features simple operation and high measurement accuracy.

Technical Parameters

Test load range:10–2000 g （dead weight loading）  

Load Accuracy: ≤1%

Adjustable test speed: 5–3000 rpm （stepless speed regulation）

Test reciprocating frequency: 0–20 Hz （accessories available for reciprocating friction tests）     

Reciprocating stroke: 1–25 mm         

Adjustable X-axis travel distance: 3–25 mm

Adjustable Z-axis lifting height: 0–100 mm

Adjustable friction diameter: Φ3–Φ50 mm

Lower specimen size range: 10–60 mm; thickness range: 2–20 mm

Upper specimen size range: Ф3–Ф6 mm ball or pin; pin length 10–15 mm （can be machined according to user requirements）

Friction force measuring range: ≤20 N

Friction coefficient measurement accuracy: 0.2% F.S

Heating module temperature: room temperature–220 °C   

Friction force measuring range: 0–20 N

Friction system measurement accuracy: 0.2% FS (full scale)

Friction environment (liquid): environmental chamber (stainless steel or PTFE), optional

Overall dimensions （mm）: 900x500x700

Weight: 60 kG

Configuration:  

1. Multifunctional friction and wear test control system: one set

2. Display: one LCD screen

3. Main unit: one set

4. Accessories: one set of tools

Backup document: one copy

Operation manual: one copy

One of the following modules can be selected

Rotating module

Specimen size: Φ10–Φ53 mm

Specimen thickness: 2–10 mm

Rotation radius: 3–20 mm

Test speed: 10–3000 r/min, accuracy ±1 r/min

(Note: selection of load and speed: at 3000 r/min, the load shall not exceed 2 N; above 2000 r/min, the load shall not exceed 5 N; above 1000 r/min, the load shall not exceed 10 N; above 500 r/min, the load shall not exceed 20 N; above 200 r/min, the load shall not exceed 100 N)

x

Reciprocating module:

Specimen size: (8–35) x (8–60)x (1.5–12) （mm x mm x mm）

Number of reciprocating cycles: unlimited

Stroke: 3–25 mm

Frequency: 0.5–20 Hz

(Note: selection of stroke and frequency: at 2 Hz, the stroke shall not exceed 10 mm; at 10 Hz, the stroke shall not exceed 5 mm; at 20 Hz, the stroke shall not exceed 2 mm; for dry friction tests, the load shall not exceed 100 N)